Mapomatic - Applications of Mapping

Although we’ve seen OS maps on other devices, such as the SatMap Active 10 before, and in software, such as the ViewRanger software for Symbian phones, Garmin are shortly to release UK OS Maps for their Garmin Colorado and Garmin Oregon GPS devices.

The OS Maps will come on a microSD card that you can slot straight into the units (although knowing Garmin you will not be able to transfer the maps to another memory card, as they use the “Secure” bit of the SD card standard to store the license to use the maps). This should not be a major problem for these devices, as they have some internal memory for storing additional POIs, and they support multiple map files on the internal memory too.

What’s different about these Garmin maps though is that as well as featuring the full visual OS maps, all the data has been included to allow you to navigate via the maps too, and POI information is included as well.

At some point, Garmin will also sell the units and maps together, but in the meantime the OS Maps will be available from November priced at £129.99.

For those who want better mapping on their GPS units, but don’t want to pay at all, then we offer the Garmin UK OSM maps (using the OpenStreetMap maps) free of charge! OpenStreetMap is still a “Work in Progress”, so not every road or footpath is covered, but the data will still enhance your GPS if you only have a very rough basemap (or no map at all), and best of all, you can help improve the map by uploading your GPS traces, and adding the missing roads and footpaths yourself.

If you are a cyclists, don’t forget we also have the OSM Cycle Map available in Garmin format.

Both downloads are available here.

Story and picture courtesy of OUTDOORSmagic.com [Via UK Gadgeteer].

Over at Pocket GPS World, they’ve published a full and frank review of the SatMap Active 10. They’ve covered all aspects of the device, in fact the only additional “Con” we would add to the Pros and Cons is the overall cost, especially if you want a lot of OS maps on the device. Head over to read the review.

The UK SatMap Active 10 GPS device, which offers a whole range of OS maps (at additional charge) has just received a fairly major software update. The new version, v1.15 features the following updates:

• A blue ‘You Are Here’ dot to distinguish current location from the red track dots.
• The ability to hide inactive routes to avoid ‘clutter’ on a map. (Main Menu > Settings > Routes Control)
• A battery meter that gives a more accurate indication of the power remaining, and an indication of when the unit is connected to an external power source.
• A more accurate record of the trip data.
• The ability to download the raw track data from the Active 10 onto a PC (via SatSYNC).
• The ability to display elevation data derived from the GPS system as opposed to from an in built height data set. (Main Menu > Settings > GPS Settings)
• The ability to calibrate the compass from the compass page.
• A low power mode that automatically sets up the unit up to maximise the battery life. (Main Menu > Settings > Advanced Power Control)
• The ability to reset the track and the trip log simultaneously. (Main Menu >Routes Menu > Reset Data)
• A 15 second screen off option. (Main Menu > Settings > Power Control)

“The new software also has a new power management system that significantly reduces
the overall power consumption of the Active 10, thereby improving battery
performance. It should also improve the GPS acquisition time and upgrade the signal
lock in difficult conditions such as under tree canopies.
The most obvious change is to the start-up operation: when switched on, the Active 10
(with no map card loaded), goes to the GPS status screen first. Yellow blocks appear on
the bar chart whilst the unit is picking up the satellites, which turn orange once they
have acquired the data from each one. Once a sufficient number of satellites have been
acquired, the unit locks on, and then automatically switches to the GPS Map screen.”

About the only thing missing from the SatMap website is information on how to obtain the new software…

[Via UK Gadgeteer]